SIG-C302
IoT Gateway Controller
• NXP i.MX 8M Plus Quad Cortex-A53 /M7 Processor
• Max. LPDDR4 8GB / eMMC 32GB
• 2 x Serial port (RS232/485/422)
• CAN-FD x 2CH
• 2 x M.2 connector for RF Module
• Support RTC, TPM 2.0
• Pre-Install Linux Debian 11, Yocto kirkstone 5.15(Optional)
• Wide Temperature -20 °C ~ 70 °C
• Max. LPDDR4 8GB / eMMC 32GB
• 2 x Serial port (RS232/485/422)
• CAN-FD x 2CH
• 2 x M.2 connector for RF Module
• Support RTC, TPM 2.0
• Pre-Install Linux Debian 11, Yocto kirkstone 5.15(Optional)
• Wide Temperature -20 °C ~ 70 °C
Specifications
| CPU/MCU | NXP i.MX 8M Plus, Quad-Core ARM Cortex-A53/M7 Processor |
| Memory | LPDDR4 4GB / 8GB(Optional) |
| Storage | eMMC 32GB |
| Real time clock | 1 x RTC, with 3V CR2032 lithium battery |
| Indicators | 7 x LED indicator |
| Cellular | 1x M.2 B key |
| Wireless LAN | 1x M.2 E key |
| Operating System | Linux Debian 11, Yocto kirkstone 5.15 Ubuntu 22.04 (Optional) |
| Power Requirement | DC 9~36V |
| Power Consumption | 9.36W (Full Loading) |
| MTBF (Hours) | 479,374 |
| Dimension | 5.5“ x 3.9“ x 1.5“ (140.5 x 98 x 39 mm) |
| Weight | 500g |
| Mounting/Installation | Din Rail, Wall Mount (Optional) |
| Operating Temperature | -4 °F ~ 158 °F (-20 °C ~ 70 °C) |
| Storage Temperature | -40 °F ~ 176 °F (-40 °C ~ 80 °C) |
| Operating Humidity | 10% ~ 95% relative umidity, non-condensing |
| Regulations | CE, FCC |
| Carrier | Planning |
| Serial Port | 2 x RS232/RS485, Phoenix Connector |
| CAN Bus | 2CH x CAN-FD, Phoenix Connector |
| Ethernet | 2 x Gigabit Ethernet, RJ45 |
| USB | 2 x USB 3.0, Type A |
| Display | 1 x HDMI (Output) |
| Power Connector | 1 x 2pin Terminal Block |
| Debug Port | 1 x Micro USB |
| Expansion Slot | 1 x SIM card slot 1 x Micro SD slot |
| Other Interface | 3 x SMA for RF Module |