Conquering Blind Spots, Redefining VRU Safety!
運輸・交通
2025/03/05
Conquering Blind Spots, Redefining VRU Safety~EverFocus AI Monitoring System (BSIS) Leads the New Era of Smart Commercial Vehicle Driving!
Introduction
Whether motivated by the desire to protect the Earth through energy conservation and carbon reduction, or driven by health considerations in the post-pandemic era, an increasing number of people are opting for cycling as a mode of transportation for commuting and leisure activities all over the world. However, according to research conducted by the World Health Organization (WHO), traffic accidents involving two-wheeled vehicles have surged to unprecedented levels in recent years. Annually, approximately 1.2 million individuals lose their lives in traffic incidents, with more than half of these fatalities involving Vulnerable Road Users (VRUs), such as pedestrians, cyclists, and motorcyclists.
In today's highly competitive transportation industry, fleet owners prioritize cost reduction and enhanced operational efficiency. The safety of drivers, passengers, and other road users significantly influences overall business performance. As the automotive industry increasingly shifts towards electronic and intelligent systems, electronic rearview mirror technologies are advancing rapidly. Large vehicles often contribute to accidents due to "driver blind spots" and "inner wheel differences." In response, many countries have implemented regulations mandating the use of advanced safety equipment, such as ADAS recorders and electronic rearview mirrors, to mitigate the risk of accidents involving commercial vehicles.
Regulation Overview
The European Union has enacted the General Safety Regulation (GSR) 2019/2144, which requires that new large vehicles be equipped with Blind Spot Information Systems (BSIS) to detect Vulnerable Road Users (VRUs), including pedestrians and cyclists. Additionally, the European Union has currently issued three regulations regarding blind spot monitoring, which are UN ECE R151, UN ECE R158, and UN ECE R159. These three regulations became mandatory on July 6,2022.
Beyond Europe, regions such as North America and Asia are also prioritizing vehicle safety enhancements. The U.S. National Highway Traffic Safety Administration (NHTSA) encourages fleet operators to integrate camera-based solutions to minimize blind spots and improve on-road safety. Meanwhile, Japan National Agency for Automotive Safety & Victims' Aid (NASVA) mandates blind spot detection systems for trucks over 8 tons, offering tax reductions and installation subsidies to promote road safety.
In response to these evolving regulations, EverFocus Electronics Corporation (TWSE: 5484) utilizes nearly 30 years of expertise in image processing and vision-based AI technology to develop Advanced Driver Assistance Systems (ADAS) solutions for large commercial vehicles. The CMS/BSIS, or Electronic Blind Spot Monitoring System, is specifically engineered to prevent accidents resulting from driver blind spots, ensuring compliance with international safety standards. Unlike other market solutions that rely on radar sensors, EverFocus's CMS/BSIS employs camera-based vision analysis, which provides following advantages:
Key Features of EverFocus Electronic Blind Spot Monitoring System
1. Adaptive Brightness & Remote Control
※Click here to learn more about CMS/BSIS products: EMS12D2
EverFocus Electronic Blind Spot Monitoring System: Revolutionizing Safety Standards for Large Commercial Vehicles!
In the current fast-evolving roadway landscape, large commercial vehicles encounter unparalleled challenges. Only the most advanced safety technologies can guarantee secure driving. The EverFocus Electronics Blind Spot Monitoring System equips fleet drivers with enhanced visibility, proactive accident prevention capabilities, and ensures full compliance with UN ECE R151 safety regulations. This system promotes smarter vehicle operation while prioritizing the safety of vulnerable road users (VRUs).
EverFocus is dedicated to advancing vision-based artificial intelligence technology while maintaining a commitment to safety excellence. We invite you to contact EverFocus today to discover more about our Electronic Blind Spot Monitoring System Solutions and how they can enhance the experience of your fleet.
More ADAS functions
https://reurl.cc/745KDN
References
WHO
Road traffic injuries
Despite notable progress, road safety remains urgent global issue
https://www.who.int/news/item/13-12-2023-despite-notable-progress-road-safety-remains-urgent-global-issue
NHTSA Proposes Significant Updates to Five-Star Safety Ratings Program
https://www.nhtsa.gov/press-releases/five-star-safety-ratings-program-updates-proposed
Information of Japan New Car Assessment Program
https://www.nasva.go.jp/mamoru/en/about/about.html
THE AUTOMOBILE AND TECHNICAL REGULATIONS
https://www.jsae.or.jp/files_publish/page/1218/en_vol75_8-2.pdf
Introduction
Whether motivated by the desire to protect the Earth through energy conservation and carbon reduction, or driven by health considerations in the post-pandemic era, an increasing number of people are opting for cycling as a mode of transportation for commuting and leisure activities all over the world. However, according to research conducted by the World Health Organization (WHO), traffic accidents involving two-wheeled vehicles have surged to unprecedented levels in recent years. Annually, approximately 1.2 million individuals lose their lives in traffic incidents, with more than half of these fatalities involving Vulnerable Road Users (VRUs), such as pedestrians, cyclists, and motorcyclists.
In today's highly competitive transportation industry, fleet owners prioritize cost reduction and enhanced operational efficiency. The safety of drivers, passengers, and other road users significantly influences overall business performance. As the automotive industry increasingly shifts towards electronic and intelligent systems, electronic rearview mirror technologies are advancing rapidly. Large vehicles often contribute to accidents due to "driver blind spots" and "inner wheel differences." In response, many countries have implemented regulations mandating the use of advanced safety equipment, such as ADAS recorders and electronic rearview mirrors, to mitigate the risk of accidents involving commercial vehicles.
Regulation Overview
The European Union has enacted the General Safety Regulation (GSR) 2019/2144, which requires that new large vehicles be equipped with Blind Spot Information Systems (BSIS) to detect Vulnerable Road Users (VRUs), including pedestrians and cyclists. Additionally, the European Union has currently issued three regulations regarding blind spot monitoring, which are UN ECE R151, UN ECE R158, and UN ECE R159. These three regulations became mandatory on July 6,2022.
- UN ECE R151: Blind Spot Information System (BSIS), means a system installed on a truck to inform the driver of a possible collision with a bicycle near the side. It is obvious to use such assistance systems for avoiding accidents between turning trucks and cyclists.
- UN ECE R158: Rear Visibility System monitors blind spots when reversing.
- UN ECE R159: Moving Off Information System (MOIS), means a system to detect and inform the driver of the presence of pedestrians and cyclists in the close-proximity forward blind-spot of the vehicle
Beyond Europe, regions such as North America and Asia are also prioritizing vehicle safety enhancements. The U.S. National Highway Traffic Safety Administration (NHTSA) encourages fleet operators to integrate camera-based solutions to minimize blind spots and improve on-road safety. Meanwhile, Japan National Agency for Automotive Safety & Victims' Aid (NASVA) mandates blind spot detection systems for trucks over 8 tons, offering tax reductions and installation subsidies to promote road safety.
In response to these evolving regulations, EverFocus Electronics Corporation (TWSE: 5484) utilizes nearly 30 years of expertise in image processing and vision-based AI technology to develop Advanced Driver Assistance Systems (ADAS) solutions for large commercial vehicles. The CMS/BSIS, or Electronic Blind Spot Monitoring System, is specifically engineered to prevent accidents resulting from driver blind spots, ensuring compliance with international safety standards. Unlike other market solutions that rely on radar sensors, EverFocus's CMS/BSIS employs camera-based vision analysis, which provides following advantages:
- AI identifications of pedestrians, cyclists, and vehicles without interference from roadside objects such as streetlights, traffic signals, or parked vehicles.
- Provides a higher pedestrian detection rate, effectively recognizing both moving and stationary individuals.
- Integrates with dashcams to document incidents, facilitating accident investigations and enhancing real-time fleet management.
Key Features of EverFocus Electronic Blind Spot Monitoring System
1. Adaptive Brightness & Remote Control
- 12.3-inch in-cabin display adjusts brightness based on ambient lighting and includes a night mode to minimize driver fatigue.
- High-resolution LCD screens on both A-pillars support split-screen viewing of blind spot areas.
- Supports video output storage via SD card and allows for adjustments to its functions via an infrared (IR) remote control.
- Four high-definition cameras replace traditional mirrors, offering a much wider field of view.
- Expands the driver's visibility by 3x compared to traditional mirrors, reducing side blind spots by approximately 10%.
- WDR technology mitigates glare from headlights and enhances visibility in low-light conditions.
- Starlight-level night vision guarantees clear imaging capabilities, even in low-light conditions.
- Aerodynamic, lightweight design reduces wind resistance and noise, enhancing fuel efficiency.
- Robust waterproof and dustproof camera housing guarantees reliable performance in challenging weather conditions.
- Vision-based AI continuously monitors blind spots for pedestrians, cyclists, and vehicles to minimize accident risks.
- Delivers real-time visual and auditory alerts, facilitating prompt driver reactions to avert collisions.
- Supports DVR storage with dual 1080P 30 Frame Per Second SD card recording and playback on a PC.
- Compatible with existing fleet management systems to enhance monitoring and operational efficiency.
- Fully compliant with UN ECE R151, GSR 2019/2144, and other various global regulations, maximizing fleet safety and profitability.
※Click here to learn more about CMS/BSIS products: EMS12D2
EverFocus Electronic Blind Spot Monitoring System: Revolutionizing Safety Standards for Large Commercial Vehicles!
In the current fast-evolving roadway landscape, large commercial vehicles encounter unparalleled challenges. Only the most advanced safety technologies can guarantee secure driving. The EverFocus Electronics Blind Spot Monitoring System equips fleet drivers with enhanced visibility, proactive accident prevention capabilities, and ensures full compliance with UN ECE R151 safety regulations. This system promotes smarter vehicle operation while prioritizing the safety of vulnerable road users (VRUs).
- Industry-Leading Vision-based AI Technology: EverFocus integrates advanced AI with cutting-edge monitoring systems, providing intelligent detection capabilities and real-time alerts to substantially mitigate driving risks.
- Instant Image Analysis for Quick Response: Efficiently evaluates images from both sides of blind spots, allowing drivers to respond swiftly to complex traffic situations.
- 360° Intelligent Around View Monitor (AVM) Protection (Optional): The optional installation of four high-definition cameras—front, rear, left, and right—facilitates a 360° Around View Monitor (AVM) panoramic system. This system achieves a real-time understanding of the surroundings of the vehicle and effectively eliminates blind spots.
EverFocus is dedicated to advancing vision-based artificial intelligence technology while maintaining a commitment to safety excellence. We invite you to contact EverFocus today to discover more about our Electronic Blind Spot Monitoring System Solutions and how they can enhance the experience of your fleet.
More ADAS functions
- Front Collision Warning System (FCWS)
- Rear Cross Traffic Alert/Rear Collision Warning (RCTA/RCW)
- Lane Departure Warning (LDW)
- Blind Spot Information System (BSIS)
- Tire Pressure Monitoring System (TPMS)
- Alcohol Lock(AL)
- Driver Drowsiness and Attention Warning (DDAW)
- 360° Around View Monitor (AVM)
https://reurl.cc/745KDN
References
WHO
Road traffic injuries
Despite notable progress, road safety remains urgent global issue
https://www.who.int/news/item/13-12-2023-despite-notable-progress-road-safety-remains-urgent-global-issue
NHTSA Proposes Significant Updates to Five-Star Safety Ratings Program
https://www.nhtsa.gov/press-releases/five-star-safety-ratings-program-updates-proposed
Information of Japan New Car Assessment Program
https://www.nasva.go.jp/mamoru/en/about/about.html
THE AUTOMOBILE AND TECHNICAL REGULATIONS
https://www.jsae.or.jp/files_publish/page/1218/en_vol75_8-2.pdf
